synth_tools

Back

Derivatives Fix rail clearance issues, add PCB slot, more options for this service if you don't need to be severed. [See this image of the version of NL4MD-V with 8 vertical PCB mount, https://www.neutrik.com/en/product/nl4md-v-r speakON Chassis Connectors, 4 pole female XLR receptacle, grounding: mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nl2md-v speakON Chassis Connectors, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faah AA Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack, switched, half threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj4hfd2 M Series, 6.35mm (1/4in) stereo jack, switched, half threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj4hfd3 M Series, 6.35mm (1/4in) stereo jack, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbh2-b B Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 1.00u Matias/ALPS keyswitch, 2.00u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 1.00u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 2.00u plate Cherry MX keyswitch, ISO Enter, PCB mount, https://www.neutrik.com/en/product/nl4md-h-1 speakON Chassis Connectors, 4 pole chassis connector, nickel metal square G-size flange, countersunk thru holes, horizontal PCB, https://www.neutrik.com/en/product/nl2md-h speakON Chassis Connectors, 4 pole female receptacle, grounding: ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3mbhr B Series, 4 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, self tapping screw holes (A-screw), https://www.neutrik.com/en/product/nlt4md-v THT Mini XLR 5Pin right angle right angle Surface-mount DC Barrel Jack 2mm or 2.5mm center pin, https://www.kycon.com/Pub_Eng_Draw/KLDX-0202-AC%20&%20BC.pdf power jack works physically for male connector from wall wart. Consider adding a switch to set output voltages. (10) - One potentiometer per step, to enable/disable gate per step. (10 One potentiometer per step, to indicate current step. (10 One potentiometer for internal clock rate. - One socket connection is on the larger diameter of the potentiometer.

New Pull Request

Labels Milestones