Labels Milestones
BackRevisions from revision 1: **Corrected:** Fix silkscreen misalignment for lower three knobs 4efd2875e8 Replaced accidentally dropped Fine tuning hole. Latest commits for file PSU/psu.diy Add PSU PSU/PSU.md | 5 If we expect or plan on developing modules which use the 4 pins (http://www.qingpu-electronics.com/en/products/WQP-PJ320D-72.html 3.5mm jack mic microphone phones headphones 4pins audio plug Headphones with microphone connector, 3.5mm, 4 pins RGB RGBLED LED, Round, FlatTop, diameter 5.0mm, 4 pins, pitch 5mm, size 82.3x14mm^2, drill diamater 1.4mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10691.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block 4Ucon ItemNo. 19965, 8 pins, pitch 7.5mm, size 66.5x15mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00056, 45Degree (cable under 45degree), 9 pins, pitch 5.08mm, size 40.6x9.8mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00014 pitch 5mm size 20x12.5mm^2 drill 1.4mm pad 2.7mm terminal block RND 205-00233, 3 pins, pitch 5mm, size 62.3x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-206, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 30x10mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-3-9-5.08 pitch 5.08mm size 30.5x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 804-301, 45Degree (cable under 45degree), 4 pins, pitch 7.5mm, size 67.5x10.3mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00004, 5 pins, pitch.
New Pull Request