Labels Milestones
BackLines ebf8c2dd87 Move LED resistors next to transistors to save on panel wires More traces and vias, and this is actually a pushbutton momentary, but roughly same dimensions as toggle switch ON-ON | | R2, R5 | 1 Hardware/Panel/precadsr-panel/fp-lib-table | 1 | 1 | 2_pin_Molex_connector | KK254 Molex connector | | | | J7, J8, J9 | 3 | 2N3904 | Small Signal NPN Transistor, TO-92 KK254 Molex header 2.54 mm spacing | | | | | Tayda | A-1955 | | | | R1, R10, R11 | 3 | 4.7k | Resistor | | R31 | 5 | 2N3904 | 0.2A Ic, 40V Vce, Small Signal NPN Transistor, TO-92 | | | | J3, J4, J5 | 3 | A1M | Potentiometer | | | | R1, R2 | 2 | 4.7k | Resistor | | | | | | | | Tayda | A-3486 or A-3487\*\*\* | | Screws and spacers (see build notes) 1 SIP socket, 2.54 mm, 1x2 (see [build notes](build.md | | | | | | | | | | | | S1 | 1 | TL074 | Quad operational amplifier, DIP-14"/>