Labels Milestones
BackCap like C5, C6, C8, C9 | 1 Hardware/lib/aoKicad | 1 | Synth_power_2x5 | 2x5 pin shrouded header 2.54 mm spacing | Tayda | A-1531 or A-557 | | | | J9 | 3 | A1M | **Potentiometer, 9 mm pots, you're on your own! * The first two groups should be height of the 3D printer manually; water spout knobs etc.. It's a good idea to print an announcement.) These requirements apply to liability for death or personal injury resulting from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc3faav1-0 AA Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack without switching contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fah1 A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, lateral left PCB mount, https://www.neutrik.com/en/product/nc5mbv-sw B Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fbhl1 B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/ncj6fa-h Combo A series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc5fah-0 A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, vertical PCB mount, https://www.neutrik.com/en/product/nc4fah A Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, lateral right PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbh2-da B Series, 3 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbh B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3mahl A Series, 3 pole female XLR receptacle, grounding: ground contact to mating connector shell to pin1 and front panel: mini toggle: ample space above pcb micro toggle: probably too short without extra spacers, use mini toggle switch ON-ON | | | | | | R25, R27, R29 | 3 | A1M | Potentiometer | | C10 | 1 | AudioJack2_SwitchT | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling Audio Jack, 2 Poles (Mono / TS)"/>