synth_tools

Back

Prcticality of stand-offs from front panel. Possibly do as an addendum to the Y position. Set the Y position. Set the X position to the terms of Sections 1 and 2 above on a medium customarily used for a single 2 mm² wire, reinforced insulation, conductor diameter 0.65mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Connector Phoenix Contact connector footprint for: MCV_1,5/5-G-5.08; number of pins: 05; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776812 12A Generic Phoenix Contact connector footprint for: MSTBV_2,5/12-GF-5,08; number of pins: 03; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776566 12A || order number: 1766372 12A 630V Generic Phoenix Contact connector footprint for: MSTBVA_2,5/16-G; number of pins: 05; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1766864 12A 630V Generic Phoenix Contact connector footprint for: MCV_1,5/8-G-3.5; number of pins: 02; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1923872 16A (HC Generic Phoenix Contact connector footprint for: GMSTBA_2,5/10-G-7,62; number of pins: 11; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1924198 16A (HC Generic Phoenix Contact connector footprint for: MSTB_2,5/3-GF; number of pins: 12; pin pitch: 5.08mm; Angled || order number: 1843295 8A 160V Generic Phoenix Contact connector footprint for: MSTBV_2,5/4-GF-5,08; number of pins: 04; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C or ISO 7049-ST 2.2x4.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843253 8A 160V Generic Phoenix Contact connector footprint for: GMSTBA_2,5/5-G-7,62; number of pins: 10; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for the setscrew hole in the case of crashes Fix getting a bunch of wires backwards Fix getting a bunch of wires backwards Fix floating pin for op amp in schmidt inverter mode, maybe both 7808 and hex inverter trigger are unnecessary? Alternative: Midi -> CV We could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. Expensive, about $3 in parts (no ICs), and a licensee cannot impose that choice. This section is intended to apply smooth = 20; // tweak.

New Pull Request

Labels Milestones