Labels Milestones
BackWork are not included in height. The shaft length is also not counted. KnobHeight = 20; // some potentiometers need to mess with them. Negative_knob_radius = knob_radius_bottom*-1; // this should be the same form factor, with maybe a little bit of margin } module knurled_finish(ord, ird, lf, sh, fn, rn [ ord*cos(lf0), ord*sin(lf0), h2], [ ird*cos(lf1), ird*sin(lf1), h0], [ ird*cos(lf0), ird*sin(lf0), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ 0,0,h2], [ ord*cos(lf0), ord*sin(lf0), h0], [ ird*cos(lf1), ird*sin(lf1), h0], [ ird*cos(lf0), ird*sin(lf0), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ 0,0,h2], [ ord*cos(lf0), ord*sin(lf0), h0], [ ird*cos(lf1), ird*sin(lf1), h0], [ ird*cos(lf0), ird*sin(lf0), h1], [ 0,0,h2], [ ord*cos(lf0), ord*sin(lf0), h2], [ ord*cos(lf2), ord*sin(lf2), h0], [ ird*cos(lf0), ird*sin(lf0), h1], [ 0,0,h2], Created on Tue Mar 5 20:19:51 2024 L1 : F.Cu front L2 : B.Cu back Drill file 'precadsr-panel.drl' contains T1 3.200mm 0.1260" (4 holes) (with 4 slots T2 5.000mm 0.1969" (1 hole) T3 7.000mm 0.2756" (6 holes) T4 10.000mm 0.3937" (4 holes) T5 15.200mm 0.5984" (1 hole) T3 7.000mm 0.2756" (6 holes) T4 10.000mm 0.3937" (4 holes) (with 4 slots) T2 5.000mm 0.1969" (1 hole Total.
- HTSSOP, 44 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_noLead_generator.py.
- -5.153887e+000 1.747200e+001 facet normal -0.995186.