synth_tools

Back

Ipc_gullwing_generator.py 100-Lead Plastic Thin Quad Flatpack (PF) - 14x14mm body, 9.5mm sq thermal pad TSSOP HTSSOP 0.65 thermal pad TSSOP HTSSOP 0.65 thermal pad TQFP64 7x7, 0.4P CASE 932BH (see ON Semiconductor Micro8 (Case846A-02): https://www.onsemi.com/pub/Collateral/846A-02.PDF PSOP44: plastic thin shrink small outline package; 24 leads; body width 5.3 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot552-1_po.pdf 14-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic Shrink Small Outline (SO) - Wide, 5.3 mm Body [TQFP] With 4.5x4.5 mm Exposed Pad (see Microchip Packaging Specification 00000049BS.pdf DFN, 6 Pin (https://www.diodes.com/assets/Package-Files/U-DFN2020-6%20(Type%20C).pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 64 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232H.pdf#page=57), generated with kicad-footprint-generator ipc_gullwing_generator.py SOIC, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0136.PDF (T1633-5), https://pdfserv.maximintegrated.com/land_patterns/90-0032.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py SO, 20 Pin (http://www.ti.com/lit/ds/symlink/cc1101.pdf#page=101), generated with kicad-footprint-generator Resistor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 64 Pin (http://www.ti.com/lit/ds/symlink/msp430f5217.pdf#page=120), generated with kicad-footprint-generator ipc_noLead_generator.py WQFN, 16 Pin (http://www.st.com/resource/en/datasheet/lis331hh.pdf), generated with kicad-footprint-generator JST SHL series connector, S10B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator Molex Nano-Fit Power Connectors, old mpn/engineering number: 5569-02A2, example for new part number: 26-60-4030, 3 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator JST ZE series connector, 14110413001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator Molex CLIK-Mate series connector, B34B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 3 times 0.127 mm² wires, basic insulation, conductor diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10684 pitch 3.5mm size 24.5x7.6mm^2 drill 1.2mm pad 2.3mm terminal block RND 205-00060, 45Degree (cable under 45degree), 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-819EGW(Ver.14A).pdf LED diameter 4.0mm Plated Hole as test point, pitch 5.08mm, size 15.2x10.6mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 134, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-13-5.08, 13 pins, pitch 3.5mm, size 21x7.6mm^2.

New Pull Request

Labels Milestones