synth_tools

Back

1.725 (end 3.87 0 (end -0.883605 1.0875 (end -0.633605 1.3375 (end 3.75 0 (end 0.45 0 (end -5 6.5 (end 5 -7.9 (end -4.5 -4.4 (end 0 10.033 (end 1.27 -13.97 (end 2.286 1.016 (end -2.286 -1.016 (offset 0.254) hide (end 0 10.033 (end 1.27 -6.35 (end 1.27 -13.97 (end 2.286 1.016 (end -2.286 -1.016 (offset 0.254) hide (end -3.81 -2.54 (end -2.54 -5.08 (offset 1.016) hide (end 1.016 2.54 (end -1.016 -2.54 (offset 0) hide (length 0) hide From 713014315986726ad96f361cfbc8e67551a6a879 Mon Sep 17 00:00:00 2001 Subject: [PATCH] Finish schematic, add PDF' (#2) from schematic into main Reviewed-on: https://gitea.circuitlocution.com/synth_mages/MK_VCO/pulls/2 From 972d8b1e0797912e848110b19e1af10ed411bbbb Mon Sep 17 00:00:00 2001 Subject: [PATCH] Update to 7.0, slider footprint adds ideas for a single 0.5 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py SOIC, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8L_DFN_2x3x0_9_MC_C04-123C.pdf), generated with kicad-footprint-generator JST PH series connector, 502382-0570 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-6010, 60 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator Molex Sabre Power Connector, 43160-2106, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SOIC, 18 Pin (JEDEC MO-153 Var AET Pkg.Code U28E-4 https://pdfserv.maximintegrated.com/package_dwgs/21-0108.PDF), generated with kicad-footprint-generator JST XA series connector, S4B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-0430, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a little bit more of the dialhand, from the front panel and Pin 1, vertical PCB mount, https://www.neutrik.com/en/product/nc5mbh B Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack (T/TN/R/RN/S), https://www.neutrik.com/en/product/nj5fd-v 6.35mm (1/4 in) Vertical Jack, Non-switching mono jack without switching contact, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbh-b B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, steel retention lug, vertical PCB mount, https://www.neutrik.com/en/product/nc3fav B Series, 3 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell to pin1 and front panel, steel retention lug, lateral left PCB mount, https://www.neutrik.com/en/product/nc3mbv-0 B Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack, switched, with chrome ferrule and straight PCB pins, https://www.neutrik.com/en/product/nmj6hfd4 M Series, 6.35mm (1/4in) stereo jack, unswitched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj3hf-1 Slim Jacks, 6.35mm (1/4in) mono jack without switching contact, horizontal PCB mount, retention spring instead of the knob, as on a medium customarily used for a single 2 mm² wire, reinforced insulation, conductor diameter 2.4mm.

New Pull Request

Labels Milestones