synth_tools

Back

Contacts, https://www.neutrik.com/en/product/nmj6hfd2-au M Series, 6.35mm (1/4in) jack receptacle, horizontal pcb mount, replaces NL4MD-H-2, https://www.neutrik.com/en/product/nl4mdxx-h-2 speakON Chassis Connectors, 8 pole chassis connector, metal housing, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbv1-da B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, color coding possible, https://www.neutrik.com/en/product/nc5fav-sw A Series, 3 pole male chassis connector, red D-size flange, countersunk thru holes, vertical PCB mount, https://www.neutrik.com/en/product/ncj6fa-h Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, half threaded nose, https://www.neutrik.com/en/product/nrj6hh-au Slim Jacks, 6.35mm (1/4in) stereo jack, switched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj4hf-1 Slim Jacks, 6.35mm (1/4in) stereo jack, vertical PCB mount, https://www.neutrik.com/en/product/nc3mav B Series, 3 pole male XLR receptacle, grounding: without ground/shell contact, vertical PCB mount, retention spring instead of A4 c852e5d6ad8630143a633f6c4ffcb4d705a43337 Add note resulting from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of the cylinder at the first layer will be very tight pushbuttons: just enough for nut, but could work with printed spacers and existing lead lengths alpha pots: tight, only 1/2 turn for nut 11mm - rotary, SR2511 style, with very large 17.5mm panel hole+snip off pin, add holes for a single 0.5 mm² wires, basic insulation, conductor diameter 2.4mm, see http://www.philmore-datak.com/mc/Page%20197.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00062 45Degree pitch 5mm size 12.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MKDS-1,5-4, 4 pins, pitch 5.08mm, size 76.2x11.2mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 131, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type086_RT03403HBLC, 3 pins, pitch 7.5mm, size 17.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block TE 282834-3 pitch 2.54mm size 5.54x6.5mm^2 drill 1.1mm pad 2.1mm Terminal Block WAGO 804-324, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 12.3x14mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-604, 45Degree (cable under 45degree), 2 pins, pitch 10mm, size 105x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type059_RT06303HBWC, 3 pins, pitch 3.5mm, size 32.5x8.3mm^2, drill diamater 1.2mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FH12-19S-0.5SH, 19 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch.

New Pull Request

Labels Milestones