Labels Milestones
Back68726f9fe082df8f029089edeb63d89037321450 Delete '3D Printing/Panels/AD&D 1e spell names in Filmoscope Quentin/Panels/SPIDER CLIMB.png 8576ad9482 Added input resistor for sync; placed everything on PCB 7f9b624c8e tweaks layout with input from sam format (units 2) (units_format 1) (precision 4 (style (thickness 0.1) (arrow_length 1.27) (text_position_mode 0) (extension_height 0.58642) (extension_offset 0.5) keep_text_aligned format (units 3) (units_format 1) (precision 4 (style (thickness 0.15) (arrow_length 1.27) (text_position_mode 0) (extension_height 0.58642) (extension_offset 0) keep_text_aligned Add control label font size to 9mm and align it precisely for repeatability Change transistor footprint to inline_wide, fix DRC ground plane spokes can be the same, see datasheet: https://www.mouser.com/datasheet/2/54/PTL-777483.pdf (page 4) if we want them to match. We could also go to same bus) - run/stop 2x Pushbutton switches, all 2pin: - reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below) - Clock POT is too small for a press-on type knob (rather than using a setscrew).
- Phoenix MKDS-1,5-15 pitch 5mm size 70x9mm^2 drill 1.3mm.
- 0.598005 -0.573948 0.559441 facet.
- Cube([137.5, 97, 1], center=true.