synth_tools

Back

Header, 2x30, 2.54mm pitch, 6mm pin length, double cols (from Kicad 4.0.7), script generated Through hole pin header SMD 1x28 1.27mm single row Through hole angled pin header THT 2x14 1.27mm double row surface-mounted straight pin header, 2x03, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated Through hole horizontal IDC box header THT 1x01 2.00mm single row (from Kicad 4.0.7), script generated Through hole socket strip THT 1x23 1.00mm single row style2 pin1 right Through hole angled socket strip SMD 2x21 1.00mm double row surface-mounted straight socket strip, 2x38, 1.27mm pitch, 3.9x4.9mm body, exposed pad, thermal vias, http://www.ti.com/lit/ds/symlink/drv8870.pdf 20-Pin Thermally Enhanced Thin Shrink Small Outline Narrow Body (http://www.analog.com/media/en/technical-documentation/data-sheets/ADuM7640_7641_7642_7643.pdf 24-Lead Plastic Shrink Small Outline (SO), see https://www.elpro.org/de/index.php?controller=attachment&id_attachment=339 SO, 4 Pin (https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/0_Datasheets/Humidity/Sensirion_Humidity_Sensors_SHTC3_Datasheet.pdf Sensirion DFN-8 SHT3x-DIS (https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Datasheets/Sensirion_Humidity_Sensors_SHT3x_Datasheet_digital.pdf 24-Lead Plastic QFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic Shrink Small Outline (SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true SSO Stretched SO SOIC 2.54 8-Lead Plastic Dual Flat, No Lead Package - 9x9 mm Body [WSON], http://www.ti.com/lit/ml/mpds421/mpds421.pdf WSON-16 3.3 x 1.35mm Pitch 0.4mm WLCSP WLCSP/XFBGA 8-pin package, staggered pins, http://www.adestotech.com/wp-content/uploads/DS-AT25DF041B_040.pdf WLCSP WLCSP-8 XFBGA XFBGA-8 CSP BGA Chip-Scale Glass-Top WLCSP-8, 2.284x1.551mm, 8 Ball, 2x4 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g051f8.pdf#page=102 ST WLCSP-25, ST die ID 495, 4.4x4.38mm, 100 Ball, 10x10 Layout, 0.4mm Pitch, https://www.ti.com/lit/ml/mxbg419/mxbg419.pdf, https://www.ti.com/lit/ds/symlink/tmp117.pdf Texas Instruments, VQFN-HR RNN0018A (http://www.ti.com/lit/ds/symlink/tps568215.pdf QFN, 16 Pin (https://www.diodes.com/assets/Datasheets/PAM8403.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-1410, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0408, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T3255-6)), generated with kicad-footprint-generator JST PHD series connector, B5P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator Molex CLIK-Mate series connector, BM10B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole PLCC, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8008S.pdf#page=20), generated with kicad-footprint-generator Soldered wire connection, for 5 times 0.15 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.5mm, size 43x8.3mm^2, drill diamater 1.1mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xxx-DV-BE-LC, 34 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator Hirose DF11 through hole, DF11-22DP-2DSA, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770858-x, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf.

New Pull Request

Labels Milestones