synth_tools

Back

Get below 200bpm -- Clock POT is the two clockwise-most pins, looking from below. Clock rate goes down when resistance goes up, opposite to expectation. C1 is too small for a single 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex LY 20 series connector, 502443-0470 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator Molex Picoflex Ribbon-Cable Connectors, 90814-0016, 16 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-A, 9 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator Molex PicoBlade Connector System, 5267-14A, 14 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 1.5 mm² wires, reinforced insulation, conductor diameter 0.48mm, outer diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00068 pitch 7.5mm Varistor, diameter 12mm, width 6.2mm, pitch 7.5mm Varistor, diameter 15.5mm, width 4.3mm, pitch 7.5mm size 24.8x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 20193, 3 pins, pitch 5.08mm, size 15.2x8mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-104, 45Degree (cable under 45degree), 1 pins, pitch 7.5mm, size 66.5x15mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00297, 12 pins, pitch 5mm, size 25x10mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310551_RT015xxHDWU_OFF-022723S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-6-5.0-H pitch 5mm size 22.3x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 10692, 15 pins, pitch 5.08mm, size 10.2x11mm^2, drill diamater 1.3mm, pad diameter 2.5mm.

New Pull Request

Labels Milestones