synth_tools

Back

Footprint "C_Rect_L22.0mm_W6.1mm_P20mm_MKT_BIG_RED_CAP" (version 20211014) (generator pcbnew footprint "SOCKET_2_PIN_Header" (version 20211014) (generator pcbnew Docs/precadsr_bom.md Normal file Unescape Hardware/Panel/precadsr_panel_al_Gerbers/precadsr_panel_al-F_SilkS.gbr Normal file Unescape Hardware/PCB/precadsr/ao_tht.pretty/Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical.kicad_mod Normal file Unescape // margins from edges h_margin = hole_dist_side + thickness; v_margin = hole_dist_top*2; v_margin = hole_dist_top*2 + thickness; v_margin = hole_dist_top*5; width_mm = hp_mm(width); // where to put the output jacks output_column = width_mm - thickness*2; left_rib_x = 0; right_rib_x = width_mm - h_margin; input_column = h_margin; bottom_row = v_margin + 12; row_1 = vertical_space/7; row_2 = row_1 + vertical_space/7; row_6 = row_5 + vertical_space/7; cv_in_1a = [left_col, row_7, 0]; cv_in_1b = [right_col, row_5, 0]; audio_out_1 = [right_col, row_1, 0]; fm_pot = [input_column + h_margin/2, row_1, 0]; square_out = [output_column, row_1, 0]; pwm_in = [first_col, first_row, 0]; c_tune = [width_mm/2 + h_margin, top_row, 0]; left_rib_x = hole_dist_side + thickness; right_rib_x = width_mm - hole_dist_side, height - v_margin - title_font_size*1.5; top_row = height - v_margin - title_font_size*1.5; saw_out = [third_col, fifth_row, 0]; square_out = [third_col, third_row, 0]; fm_lvl = [second_col, fifth_row, 0]; square_out = [third_col, fourth_row, 0]; triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; audio_out_2 = [right_col, row_6, 0]; cv_1b_atten = [right_col, row_2, 0]; cv_2b_atten = [right_col, row_5, 0]; audio_out_1 = [right_col, row_2, 0]; cv_2b_atten = [right_col, row_5, 0]; cv_in_2a = [left_col, row_3, 0]; manual_2 = [left_col, row_1, 0]; fm_pot = [input_column + h_margin/2, row_1, 0]; pwm_in = [width_mm - h_margin - working_width/8, row_2, 0]; fm_in = [input_column + h_margin/2, row_1, 0]; pwm_in = [width_mm - h_margin - working_width/8, row_3, 0]; cv_in_2b = [right_col, row_3, 0]; manual_2 = [left_col, row_6, 0]; cv_1b_atten = [right_col, row_6, 0]; audio_in_1 = [left_col, row_6, 0]; cv_1b_atten = [right_col, row_1, 0]; pwm_in = [first_col, first_row, 0]; sync_in = [first_col, third_row, 0]; saw_out = [h_margin + working_width/4, row_1, 0]; fm_pot = [input_column + h_margin/2, bottom_row, 0]; fm_in = [h_margin+working_width/8, row_3, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_4, 0]; left_rib_x = thickness * 1; right_rib_x = width_mm - 9.5/2 - right_rib_thickness - tolerance; // left_panel_width = 12.5*3 + tolerance*4; // column from edge plus hole radius h_wall(h=4, l=slider_spacing * 10 + center_adjust; right_col = width_mm - 10.

New Pull Request

Labels Milestones