Labels Milestones
BackInjury resulting from real TL0x4s Add note resulting from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc3faav2-0 AA Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack, switched, with chrome ferrule and offset PCB pins, https://www.neutrik.com/en/product/nmj4hcd2 M Series, 6.35mm (1/4in) stereo jack, switched, fully threaded nose, https://www.neutrik.com/en/product/nrj4hh Slim Jacks, 6.35mm (1/4in) stereo jack, switched, half threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj4hhd2 M Series, 6.35mm (1/4in) mono jack without switching contact, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fah2-da A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3faav1 AA Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc5fav-da A Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahl1-0 A Series, 3 pole female receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3maah-1 AA Series, 3 pole.
- B08B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 28.
- 65x10.3mm^2 drill 1.3mm pad.
- 12; row_1 = bottom_row + v_margin + 12.