Labels Milestones
BackHttp://www.vishay.com/docs/34030/im.pdf Inductor Axial series Axial Horizontal pin pitch 20.32mm 2W length 13.0mm width 4.0mm Capacitor C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=10.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf C Disc series Radial pin pitch 27.50mm length 33mm width 20mm Capacitor C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*8.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 10.00mm diameter 11mm Fastron 77A Inductor, Axial series, Axial, Horizontal, pin pitch=30.48mm, 7W, length*width*height=25*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf Resistor Axial_Power series Box pin pitch 5.00mm 2W length 11.9mm diameter 4.5mm Tantal Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf CP Axial series Axial Horizontal pin pitch 52mm length 46mm width 19.1mm Bourns 5700 L_Toroid, Vertical series, Radial, pin pitch=5.00mm, , diameter=7.5mm, Fastron, 07P, http://www.fastrongroup.com/image-show/37/07M.pdf?type=Complete-DataSheet&productType=series Inductor Radial series Radial pin pitch 2.50mm diameter 3.0mm z-position of LED center 2.0mm, 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 3.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins LED, diameter 5.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm 2 pins Rectangular size 4.8x2.5mm^2 diameter 2.0mm SMD pad as test point, pitch 2.54mm, hole diameter 2.0mm 2 pins Datasheet can be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE. You are renaming the default.
New Pull Request