Labels Milestones
BackSize 31.5x15mm^2 drill 1.2mm pad 2mm PhoenixContact PTSM0,5 7 HV 2,5mm vertical SMD spring clamp terminal block RND 205-00047 pitch 5mm Varistor, diameter 9mm, width 6.1mm, pitch 7.5mm size 89x15mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-212, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 25x8.1mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-103, 45Degree (cable under 45degree), 9 pins, pitch 10mm, size 162x14mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block connector Terminal Block WAGO 804-105, 45Degree (cable under 45degree), 36 pins, pitch 5mm, size 25x8.3mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-504 45Degree pitch 5mm size 65x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00017, 7 pins, pitch 7.5mm, size 92.3x14mm^2, drill diamater 1.15mm, pad diameter 2.7mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 6 times 0.1 mm² wires, reinforced insulation, conductor diameter 0.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator TE, 826576-2, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Angled solder pin 1 (so is open or ground). Part of \nloop mod Part of \nloop mod Part of \nloop mod Part of \nloop mod Part of speed \nswitch mod (0 F.Cu signal hide.
New Pull Request