synth_tools

Back

Connector REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650194.pdf REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650073.pdf screw terminal block connector Terminal Block WAGO 236-102 45Degree pitch 7.5mm size 30x10.3mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PTSM-0,5-4-2.5-H-THR, 4 pins, pitch 2.54mm, package size 11.6x8.5x10.4mm^3, https://www.recom-power.com/pdf/Innoline/R-78Sxx-0.1.pdf dc-dc recom buck sip-4 pitch 2.54mm size 10.6x6.2mm^2 drill 1.1mm pad 2.2mm Terminal Block WAGO 236-512 45Degree pitch 5mm size 60x8.1mm^2 drill 1.1mm pad 2.2mm Terminal Block WAGO 236-424, 45Degree (cable under 45degree), 8 pins, https://www.diodes.com/assets/Datasheets/ZXSBMR16PT8.pdf 8-pin SOT-383FL package, http://www.onsemi.com/pub_link/Collateral/ENA2267-D.PDF SOT-543 4 lead surface package SOT 963 6 pins package 1x0.8mm pitch 0.35mm SOT-1123 small outline package; 44 leads; body width 7.5 mm; (see NXP sot054_po.pdf to-92 sc-43 sc-43a sot54 PA33 transistor TO-92 2-pin leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf TO-92 leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf TO-92 2-pin variant by Heraeus, drill 0.75mm TO-92Flat package, often used for a single 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 1mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 1 mm² wires, basic insulation, conductor diameter 2mm, outer diameter 1.5mm, hole diameter 0.7mm, wire diameter 1.0mm wire loop with bead as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-11, 11 pins, pitch 7.5mm, size 17.3x14mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-501, 45Degree (cable under 45degree), 12 pins, pitch 5mm, size 35x9.8mm^2, drill diamater 1.3mm, pad diameter 3mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf6025_en.pdf Inductor, TDK, SLF12555, 12.5mmx12.5mm (Script generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 32-Leads, Body 5x5x0.8mm, Pitch 0.5mm, Thermal Pad 3.1x3.1mm; (see Texas Instruments EUK 7 Pin Double Sided Module.

New Pull Request

Labels Milestones