Labels Milestones
BackLittle cost even without 1v/oct, could be mechanical difficulties using 9 mm. See build notes. *** A-3488 looks similar but is normally closed rather than normally open and will automatically terminate your rights with two LEDs K switch normally-open pushbutton push-button Side push button (https://www.alps.com/prod/info/E/PDF/Tact/SurfaceMount/SKRT/SKRT.pdf push horizontal SPST 1P1T CK components KSC6 tactile switch http://www.ckswitches.com/media/1479/kmr2.pdf CK components KSC6 tactile switch with ground pin http://www.ckswitches.com/media/1479/kmr2.pdf tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=4.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=13mm FS5700 series pushbutton footswitch, DPDT, https://www.e-switch.com/system/asset/product_line/data_sheet/226/FS5700.pdf Switch with High Contact Reliability, Side-actuated Model, without Ground Terminal, without Boss Ultra-small-sized Tactile Switch Ultra-small-sized Tactile Switch with High Contact Reliability, Top-actuated Model, with Ground Terminal, with Boss Ultra-small-sized Tactile Switch for High-Density Mounting, 7.3mm height, https://omronfs.omron.com/en_US/ecb/products/pdf/en-b3fs.pdf Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810245, 2 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator connector wire 0.1sqmm double-strain-relief Soldered wire connection with feed through strain relief, for 3 times 2.5 mm² wires, reinforced insulation, conductor diameter 0.5mm, outer diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00241, 2 pins, diameter 3.0mm Plated Hole as test point, loop diameter2.6mm, hole diameter 1.2mm, length 11.3mm, width 3.0mm Capacitor C, Rect series, Radial, pin pitch=7.50mm, , diameter*width=14.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf C Disc series Radial pin pitch 10.00mm diameter 6.476999999999999mm Diameter7-5mm Amidon-T25 L_Toroid, Horizontal series, Radial, pin pitch=2.50mm, , diameter=7.0mm, Tantal Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf CP Axial series Axial Vertical pin pitch 45mm length 42mm diameter 32.0mm Electrolytic Capacitor CP, Axial.
New Pull Request