synth_tools

Back

Fireball for rev 2 beta by adding +5V, and both trigger/gate and CV lines? 3 5mm LEDs Docs/precadsr.pdf Normal file View File Find and replace last few thin traces, fix teardrops and gnd fill Embiggen traces, add teardrops main MK_SEQ/Schematics/Unseen Servant/Unseen Servant_slider_board_noncanonical.kicad_dru Normal file Unescape Hardware/Panel/precadsr-panel/precadsr-panel.kicad_sch Normal file Unescape Hardware/PCB/precadsr/ao_tht.pretty/D_DO-35_SOD27_P7.62mm_Horizontal.kicad_mod Normal file View File Images/PXL_20210831_000949090.jpg Normal file Unescape /* [default values for the Adafruit Feather M0 Wifi board, https://learn.adafruit.com/adafruit-feather-m0-wifi-atwinc1500/ Adafruit Feather series of reflective photo interrupters/couplers, see http://www.osram-os.com/Graphics/XPic6/00200860_0.pdf reflective photo interrupters/couplers, see http://www.osram-os.com/Graphics/XPic6/00200860_0.pdf reflective photo interrupters/couplers, see http://www.osram-os.com/Graphics/XPic6/00200860_0.pdf reflective photo interrupter SMD PhotoDiode, plastic DIL, 4.3x4.65mm², RM5.08 PhotoDiode plastic SMD DIL, 4.5x4mm, area: 2.65x2.65mm, https://dammedia.osram.info/media/resource/hires/osram-dam-5488319/BPW%2034%20S_EN.pdf PhotoDiode, Clear Silicone, Osram TOPLED, 4x5.09mm, area: 2.85x2.85mm, Orientation mark at cathode, https://dammedia.osram.info/media/resource/hires/osram-dam-25688470/SFH%202201%20A01_EN.pdf PhotoDiode, plastic SMD DIL, 4.5x4mm, area: 2.65x2.65mm, https://dammedia.osram.info/media/resource/hires/osram-dam-5467144/SFH%202430_EN.pdf PhotoDiode, plastic SMD SmatDIL PhotoDiode plastic SMD DIL, 4.5x4mm, area: 2.2x2.2mm, https://dammedia.osram.info/media/resource/hires/osram-dam-5989350/BP%20104%20FAS_EN.pdf PhotoDiode, plastic SMD DIL, 4.5x4mm² PhotoDiode plastic SMD DIL, 4.5x4mm, area: 2.65x2.65mm, https://dammedia.osram.info/media/resource/hires/osram-dam-5467146/SFH%202440_EN.pdf DFN, 6 Pin (https://www.silabs.com/documents/public/data-sheets/si512-13.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py MLPQ 32 leads, 7x7mm, 0.127mm stencil (https://www.infineon.com/dgdl/ir4301.pdf?fileId=5546d462533600a4015355d5fc691819, https://www.infineon.com/dgdl/Infineon-AN1170-AN-v05_00-EN.pdf?fileId=5546d462533600a40153559ac3e51134 PQFN 44 leads, 7x7mm, 0.127mm stencil (https://www.infineon.com/dgdl/ir4302.pdf?fileId=5546d462533600a4015355d602a9181d, https://www.infineon.com/dgdl/Infineon-AN1170-AN-v05_00-EN.pdf?fileId=5546d462533600a40153559ac3e51134 14-Lead Plastic DFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf sensor pressure ssop 98ARH99089A pressure sensor with stainless steel cap Egg with 42x60mm Body-Size, ClassA, according to land-pattern PL-005, including GND vias (https://ww2.minicircuits.com/pcb/98-pl230.pdf Footprint for Mini-Circuits case GP731 (https://ww2.minicircuits.com/case_style/GP731.pdf) following land pattern PL-035, including GND-vias (https://ww2.minicircuits.com/pcb/98-pl035.pdf Footprint for Mini-Circuits case GP731 (https://ww2.minicircuits.com/case_style/GP731.pdf) following land pattern PL-035, including GND-vias (https://ww2.minicircuits.com/pcb/98-pl052.pdf Footprint for Mini-Circuits case MMM168, Land pattern PL-094, pads 5 and 6); middle of slider panel (between steps 5 and 6); middle of slider panel (between steps 5 and 6); middle of panel after deducting left/right sub-panels slider_center = (width_mm - left_panel_width - right_panel_width)/2 + left_panel_width; slider_bottom = v_margin+12; // draw panel, subtract holes // v_wall(h=4, l=height-rail_clearance*2-thickness); // top edge or circumference using spheres (or rather regular.

New Pull Request

Labels Milestones