Labels Milestones
BackMK_VCO/Schematics/resistor_keyboard.diy 497 lines ebf8c2dd87 Move LED resistors next to transistors to save on panel wires 88bf85725f Update to 7.0, slider footprint Add footprint items for panel holes; separate panel and Pin 1, vertical PCB mount, https://www.neutrik.com/en/product/nl4md-h-1 speakON Chassis Connectors, 4 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahr-0 A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, gold plated contacts, fully threaded nose, https://www.neutrik.com/en/product/nrj6hh-au Slim Jacks, 6.35mm (1/4in) stereo jack, switched, with chrome ferrule and straight PCB pins, https://www.neutrik.com/en/product/nmj4hfd3 M Series, 6.35mm (1/4in) mono jack, switched, with chrome ferrule and offset PCB pins, https://www.neutrik.com/en/product/nmj6hcd3 M Series, 6.35mm (1/4in) jack receptacle, vertical pcb mount, https://www.neutrik.com/en/product/nlj2md-v speakON Chassis Connectors, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj5fi-h Combo I series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, horizontal PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 1.25u, plate.
New Pull Request