synth_tools

Back

12.2x10mm^2 drill 1.2mm pad 2.4mm Terminal Block 4Ucon ItemNo. 10686, 9 pins, pitch 7.5mm, size 14x15mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-512, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 122x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, hole diameter 1.2mm THT pad THT pad as test Point, square 4.0mm side length, hole diameter 1.2mm, length 11.3mm, width 3.0mm Capacitor C, Rect series, Radial, pin pitch=5.00mm, , length*width=7.2*7.2mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf C Rect series Radial pin pitch 2.50mm diameter 7.5mm width 4.6mm Capacitor C, Disc series, Radial, pin pitch=2.50mm, , length*width=4*2.5mm^2, Capacitor C Rect series Radial pin pitch 5.00mm length 8mm width 8mm height Inductor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator Molex Nano-Fit Power Connectors, 105309-xx02, 2 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SOIC, 28 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-9505-AT42-QTouch-BSW-AT42QT1060_Datasheet.pdf#page=28), generated with kicad-footprint-generator JST ZE series connector, B32B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator Soldered wire connection, for 2 times 1 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-310, 45Degree (cable under 45degree), 16 pins, pitch 10mm, size 92.3x14mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10695.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00246 pitch 10.2mm size 96.5x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00079, 3 pins, pitch 5mm.

New Pull Request

Labels Milestones