synth_tools

Back

WLCSP-16 2.225x2.17mm, 2.17x2.225mm, 16 Ball, 4x4 Layout, 0.5mm Pitch, http://www.ti.com/lit/ds/symlink/txb0104.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf BGA 12 0.5 R-XBGA-N12 Texas Instruments, DSBGA, 3.0x1.9x0.625mm, 28 ball 7x4 area grid, YZT, 1.86x1.36mm, 12 Ball, 4x3 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32l412t8.pdf ST WLCSP-49, off-center ball grid, ST die ID 472, 4.36x4.07mm, 81 Ball, 9x9 Layout, 0.4mm Pitch, http://www.st.com/content/ccc/resource/technical/document/technical_note/92/30/3c/a1/4c/bb/43/6f/DM00103228.pdf/files/DM00103228.pdf/jcr:content/translations/en.DM00103228.pdf pSemi CSP-16 1.64x2.04x0.285mm (http://www.psemi.com/pdf/datasheets/pe29101ds.pdf, http://www.psemi.com/pdf/app_notes/an77.pdf UFD Package, 4-Lead Plastic Small Outline No-Lead http://www.ti.com/lit/ml/mpds176e/mpds176e.pdf Plastic Small Outline (SO), see https://docs.broadcom.com/docs/AV02-0173EN 4-Lead Plastic Stretched Small Outline (SO), see http://datasheet.octopart.com/OPIA403BTRE-Optek-datasheet-5328560.pdf 4-Lead Plastic Small Outline Package (MS) [MSOP], variant of 8-Lead Plastic Small Outline No-Lead 8-Lead Plastic DFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (4mm x 3mm) (see Linear Technology DFN_24_05-08-1864.pdf DKD Package; 24-Lead Plastic Shrink Small Outline (ST)-4.4 mm Body [TQFP] With 4.5x4.5 mm Exposed Pad (see Microchip Packaging Specification 00000049BS.pdf TQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00476-02.pdf), generated with kicad-footprint-generator JST XA series connector, B14B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator Hirose DF11 through hole, DF11-18DP-2DSA, 9 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 24 Pin (https://www.st.com/resource/en/datasheet/led1642gw.pdf#page=37), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV-BE-LC, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection, for 4 times 2.5 mm² wires, reinforced insulation, conductor diameter 0.48mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator TE, 826576-6, 6 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator JST ZE series connector, LY20-38P-DT1, 19 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator Hirose DF13 through hole, DF13-03P-1.25DSA, 3 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator JST ACH series connector, SM03B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 22-27-2061, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py AMS OLGA, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/20005474E.pdf#page=25), generated with kicad-footprint-generator Molex PicoBlade series connector, 505405-0370 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through.

New Pull Request

Labels Milestones