synth_tools

Back

Bottom railHeight = (threeUHeight-panelOuterHeight)/2; mountSurfaceHeight = (panelOuterHeight-panelInnerHeight-railHeight*2)/2; hp=5.08; hwCubeWidth = holeWidth-mountHoleDiameter; offsetToMountHoleCenterY=mountSurfaceHeight/2; offsetToMountHoleCenterX=hp;//1hp margin on each copy an appropriate copyright notice and this is actually a pushbutton momentary, but roughly same dimensions as toggle switch ON-ON Push button switch, generic, symbol, four pins D Momentary Switch, single pole normally-open tactile switch SPST right angle, PTS645VL83-2 LFS C&K Button tactile switch SPST right angle, http://spec_sheets.e-switch.com/specs/P040042.pdf E-Switch sub miniature slide switch, right-angle, http://www.ckswitches.com/media/1422/js.pdf Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89009xx, 9 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-174 , 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 0.5 mm² wires, basic insulation, conductor diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/20001.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00054 pitch 5mm size 122x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-101, 45Degree (cable under 45degree), 24 pins, pitch 2.54mm, size 18.2x6.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10695, vertical (cable from top), 5 pins, pitch 10mm, size 45.8x8.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310671_RT019xxHDWC_OFF-023605N.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MPT-0,5-7-2.54, 7 pins, pitch 5mm, size 15x7.6mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00304 pitch 10mm size 82.3x14mm^2 drill 1.15mm pad 3mm single screw terminal block RND 205-00006, 7 pins, pitch 5mm, size 35x8.1mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10697 vertical pitch 3.5mm size 32.5x8.3mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-16 pitch 5mm size 45x9.8mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type703_RT10N03HGLU, 3 pins, pitch 3.5mm.

New Pull Request

Labels Milestones