synth_tools

Back

MA +12 V, and sustain voltage is taken from \npot pin 1 x 1 mm, 734-164 , 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py TQFN, 20 Pin (https://www.ti.com/lit/ds/symlink/ts3ds10224.pdf#page=29), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 24 Pin (https://www.nxp.com/docs/en/package-information/98ASA00734D.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 3 times outer diameter, generated with kicad-footprint-generator Tantalum Capacitor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole M2, height 5, Wuerth electronics 9774070943 (https://katalog.we-online.de/em/datasheet/9774070943.pdf), generated with kicad-footprint-generator Molex Pico-Clasp series connector, 14111113001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.4mm, outer diameter 3.5mm, size 21.7x7mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00243, 4 pins, pitch 2.54mm, size 15.7x6.5mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00086, vertical (cable from top), 3 pins, pitch 7.5mm, size 66.5x15mm^2, drill diamater 1.4mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00084, 8 pins, pitch 5.08mm, size 20.3x9.8mm^2, drill diamater 1.5mm, 2 pads, pad diameter 2.5mm, hole diameter 1.1mm, length 8.5mm, width 2.8mm, e.g. Ettinger 13.13.865, https://katalog.ettinger.de/#p=434 solder Pin_ with flat with hole, hole diameter 1.2mm THT rectangular pad as test Point, diameter 2.0mm SMT Gate Drive Transformer, 1:1:1, 8.6x6.7x3.6mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf SMT Gate Drive Transformer, 1:1:1, 8.6x6.7x3.6mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf SMT Gate Drive Transformer, 1:1:1, 11.8x8.8x4.0mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf SMT Gate Drive Transformer, 1:1, 9.5x7.1x5.3mm (https://productfinder.pulseeng.com/products/datasheets/SPM2007_61.pdf SMT Gate Drive.

New Pull Request

Labels Milestones