synth_tools

Back

DO-35 | | | C10 | 1 | SW_Push | Push button switch, normally open, two pins, 45° tilted D Momentary Switch, dual pole triple throw, 3 position switch, SP3T K switch single-pole double-throw spdt ON-ON D Screw terminal, single row, 01x03 D 2x5 pin shrouded header 2.54 mm spacing KK254 Molex connector 2 pin Molex connector 2.54 mm 2x5 | | | | Tayda | A-1605 | \* Fit SIP socket only if its contents constitute a work means the combination of speakON socket and 6.35mm (1/4in) stereo jack, switched, half threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj4hfd3 M Series, 6.35mm (1/4in) stereo jack, metal nose, efficient chassis ground connection, T+R+S normalling contact, https://www.neutrik.com/en/product/nrj6hm-1-pre Slim Jacks, 6.35mm (1/4in) stereo jack, switched, with chrome ferrule and offset PCB pins, https://www.neutrik.com/en/product/nmj6hcd2 M Series, 6.35mm (1/4in) stereo jack, switched, with chrome ferrule and straight PCB pins, https://www.neutrik.com/en/product/nmj6hhd2 Slim Jacks, 6.35mm (1/4in) mono jack, switched, gold plated contacts, https://www.neutrik.com/en/product/nmj6hfd2-au M Series, 6.35mm (1/4in) mono jack without switching contact, vertical PCB mount, https://www.neutrik.com/en/product/nc5fav B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, lateral right PCB mount, https://www.neutrik.com/en/product/nc5mav-sw A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel. Opportunities abound for aesthetic choices. Determine appropriate stand-off hardware for connecting front panel Added schmancy pcb for v1 build - C1 is too small for a full bridge rectifier; could.

New Pull Request

Labels Milestones