Labels Milestones
Back6x4mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-208 45Degree pitch 10mm size 35x10.3mm^2 drill 1.3mm pad 2.6mm Terminal Block pitch 10.00mm length 11.5mm width 2.8mm solder Pin_ diameter 1.0mm, hole diameter 0.5mm test point SMD pad as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector Terminal Block WAGO 236-109, 45Degree (cable under 45degree), 6 pins, pitch 7.5mm, size 37.5x11mm^2, drill diamater 1.15mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 804-305, 45Degree (cable under 45degree), 48 pins, pitch 7.5mm, size 22.5x11mm^2, drill diamater 1.3mm, pad diameter 1.4mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST PUD side entry Molex Pico-EZmate side entry Molex CLIK-Mate series connector, SM03B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator JST PUD series connector, B3PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP-I, 48 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=347), generated with kicad-footprint-generator JST ZE series connector, B9PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator Hirose FH12, FFC/FPC connector, FH12-26S-0.5SH, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 0.1 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with.
- Diotec SO-DIL Slim, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/b40fs.pdf SMD diode bridge.
- 55.9x11.2mm^2 drill 1.3mm pad.
- 5x DIP Switch, Single Pole Single Throw.