synth_tools

Back

Shafthole_faces = 20; shaft_radius = 3.25; shaft_smoothness = 20; shaft_is_flatted = true; cylinder_number_of_indentations = 10; knob_radius_bottom = 14; // [1:1:84] /* [Holes] */ hole_dist_top = 2.5; //mm first_col = 10.1+center_adjust; //mm second_col = width_mm/2; //mm third_col = 60.7-center_adjust; //mm cv_in = [first_col, first_row, 0]; c_tune = [width_mm/2 + h_margin, top_row, 0]; f_tune = [second_col, fourth_row, 0]; triangle_out = [third_col, third_row, 0]; fm_in = [h_margin+working_width/8, row_4, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_3, 0]; pwm_duty = [second_col, first_row, 0]; //Second row interface placement f_tune = [width_mm/2 + h_margin, top_row, 0]; f_tune = [width_mm/2 + h_margin, top_row, 0]; f_tune = [width_mm/2 + h_margin, top_row, 0]; f_tune = [h_margin+working_width/8, row_4, 0]; left_rib_x = thickness * 1; right_rib_x = width_mm - thickness*2; // How much horizontal space needed for left-hand and right-hand sub-panels left_panel_width = 12.5*3 + tolerance*4 + 8; //three knobs plus space between two resistors **Corrected:** Updated C5 and C14 with more panel layout # Using the Precision ADSR build notes | C7, C12, C13 | 1 | 10nF | Unpolarized capacitor | | | J8 | 1 nF | Unpolarized capacitor | | | Tayda | A-826 | | Screws, nuts, and spacers (see [build notes](build.md)) | | Tayda | A-1157 or A-2425 | | Tayda | A-3588 | | | R25 | 1 | B10k | Potentiometer | | | D1, D2, D3, D4, D5, D8, D9, D10 | 8 | 1N4148 | 100V 0.15A standard switching diode, DO-35 | | | | | J1 | 1 | Synth_power_2x5 | 2x5 pin shrouded header 2.54 mm spacing Pin header 2.54 mm spacing | Tayda | A-826 | | | | Tayda | A-4349 | | | | | | Tayda | A-1624 or A-2969 | | Tayda | A-826 | | | | | Tayda | A-1157 or A-2425 | | | | C10 | 3 | 10k | Resistor | | S2 | 1 | SW_SPDT | Switch, single pole normally-open illuminated tactile switch https://cdn.sos.sk/productdata/80/f6/aabf7be6/5gth9358222.pdf Switch NKK G1xJP.

New Pull Request

Labels Milestones