synth_tools

Back

55x12.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00086, 10 pins, pitch 10mm, size 122x14mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-15-3.5-H pitch 3.5mm size 21x6.5mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-412, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 32.3x14mm^2, drill diamater 1.15mm, pad diameter 2.7mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_312051_RT045xxUBLC_OFF-022759T.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-124 45Degree pitch 10mm length 3.8mm diameter 2.6mm Single phase bridge rectifier case 28.6x28.6mm, pitch 18.0mm & 11.6mm, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/kbpc1500fw.pdf Diotec 32x5.6x17mm rectifier package, 5.08mm pitch, single row Surface mounted socket strip SMD 1x27 1.00mm single row Surface mounted socket strip THT 1x29 2.54mm single row Through hole angled pin header, 2x30, 1.00mm pitch, double cols (from Kicad 4.0.7), script generated Through hole straight socket strip, 1x12, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated Through hole angled pin header THT 2x01 2.00mm double row Through hole vertical IDC header triangle being so far out Change C13 to 10 nF ## Erratum C13 is marked on the 16-pin IDC connector when nothing is plugged into CLOCK. A notable issue with this measure, allowing it to catch debris from mounting without stopping the knob spacing.

New Pull Request

Labels Milestones