synth_tools

Back

900mil Socket LongPads 64-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket 3M 16-pin zero insertion force socket, through-hole, row spacing 7.62 mm (300 mils 24-lead surface-mounted (SMD) DIP package, row spacing 6.73 mm (264 mils), body size 9.78x19.96mm (see e.g. Https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD SMD 4x-dip-switch SPST KingTek_DSHP04TS, Slide, row spacing 7.62 mm (300 mils), body size 9.78x12.34mm (see e.g. Http://www.ti.com/lit/ds/symlink/drv5023.pdf TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm, hand-soldering variant with enlarged pads (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot371-1_po.pdf STC SOP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/cp-16-40.pdf), generated with kicad-footprint-generator JST PH series connector, B2B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator connector Molex KK-396 horizontal Molex SPOX Connector System, 43045-0821 (alternative finishes: 43045-220x), 11 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xx-DV-TE, 33 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator Resistor SMD 1020 (2550 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20019/rcwe.pdf), generated with kicad-footprint-generator connector wire 1sqmm strain-relief Soldered wire connection with double feed through strain relief, for 4 times 2.5 mm² wires, reinforced insulation, conductor diameter 0.5mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 1.5 mm² wire, basic insulation, conductor diameter 0.65mm, outer diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-303 45Degree pitch 7.5mm size 30x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00006 pitch 5mm size 22.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-114, 45Degree (cable under 45degree), 16 pins, pitch 10mm, size 95x8.1mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-5-3.5-H pitch 3.5mm size 17.5x7.6mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix PT-1,5-7-3.5-H, 7 pins, pitch 10mm, size 45x8.1mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type011_RT05505HBWC, 5 pins, single row (from Kicad 4.0.7!), script generated Surface mounted pin.

New Pull Request

Labels Milestones