synth_tools

Back

Shorts Casc Out normal to TP10, optional) - Casc Out - 1K to U3-7 Glide section not working right, just pegging the output jacks working_height = height - v_margin; working_increment = working_height / (8+tolerance/5); // generally-useful spacing amount for vertical columns of stuff // step rotary switch with ground pin http://www.ckswitches.com/media/1479/kmr2.pdf tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm tact sw push 6mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=13mm FS5700 series pushbutton footswitch, DPDT, https://www.e-switch.com/system/asset/product_line/data_sheet/226/FS5700.pdf Switch with High Contact Reliability, Top-actuated Model, without Ground Terminal, with Boss SPST button switch OFF-(ON) | Dailywell | PAS7B3M1CESA6-5 | Tayda | A-804 | | Q1, Q2, Q3, Q4, Q5 | 5 | 2N3904 | Small Signal NPN Transistor, TO-92 Audio Jack, 2 Poles (Mono / TS) | | R4, R6, R7 | 2 pin Molex connector 2.54 mm spacing D 3 rotary switches are actually 2p6t, which means only six different step counts are available until the replacement arrives - Wiring SW15 (once/stop) and cascade out is easier done via skywiring; only one cross-board wire is needed, vs 3 if the PCB is used. In loop position, loop\nis connected to shell.

New Pull Request

Labels Milestones