synth_tools

Back

See http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00083, 7 pins, pitch 7.5mm, size 15x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, hole diameter 1.2mm THT pad as test Point, diameter 2.0mm test point THT pad THT pad as test Point, diameter 3.0mm 2 pins LED, diameter 10.0mm, 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-819EGW(Ver.14A).pdf LED diameter 3.0mm z-position of LED center 2.0mm 2 pins LED_Rectangular, Rectangular, Rectangular size 4.5x1.6mm^2, 2 pins, color: clear IR infrared LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 6.0mm 2 pins LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 3.0mm, 2 pins, pitch 5mm, size 32.3x14mm^2, drill diamater 1.1mm, pad diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator connector wire 0.25sqmm double-strain-relief Soldered wire connection with feed through strain relief, for 4 times 0.75 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 804-114, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 25x10mm^2, drill diamater 1.4mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix MKDS-1,5-14 pitch 5mm size 40x7.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00304, 8 pins, pitch 5mm, size 75x9mm^2, drill diamater 0.7mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 133, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block TE 282834-4, 4 pins, pitch 5mm, size 31.5x15mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-12-5.0-H, 12 pins, pitch 3.81mm, hole diameter 1.5mm (loose fit), length 10.0mm solder Pin_ diameter 1.0mm, hole diameter 1.3mm, wire diameter 1.0mm wire loop as test Point, square 4.0mm side length, hole diameter 0.5mm test.

New Pull Request

Labels Milestones