synth_tools

Back

MicroSD Card Connector, Surface Mount, ZIF, Bottom Contact FFC/FPC, 200528-0040, 4 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator Molex Picoflex Ribbon-Cable Connectors, 90814-0012, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py WQFN, 16 Pin (https://www.allegromicro.com/~/media/Files/Datasheets/A4403-Datasheet.ashx), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV-BE-A, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection, for 5 times 0.15 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 2mm, outer diameter 3.5mm, size 17.5x7.6mm^2, drill diamater 1.3mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Philmore THT Terminal Block Phoenix PT-1,5-12-5.0-H pitch 5mm size 37.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-304, 45Degree (cable under 45degree), 8 pins, pitch 2.54mm, drill diameter 0.8mm Test point with 2 copper strip, labeled with numbers SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, open SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, bridged with 1 copper strip SMD 1x31 2.00mm single row style1 pin1 left Surface mounted socket strip SMD 1x05 1.00mm single row (from Kicad 4.0.7), script generated Through hole angled pin header THT 2x23 1.27mm double row surface-mounted straight pin header, 2x22, 1.27mm pitch, double rows Surface mounted pin header SMD 1x03 2.54mm single row male, vertical entry, strain relief clip Harwin LTek Connector, 10 pins, pitch 7.5mm, size 62.3x14mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type055_RT01503HDWU, 3 pins, pitch 3.5mm, size 14x6.5mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type101_RT01605HBWC pitch.

New Pull Request

Labels Milestones