synth_tools

Back

Potentiometers: - One idea: add a voltage to trigger a second sequencer's run, which then re-triggers the first. More feature ideas: Trigger out - Gate out (could normal to TP10, optional) - Casc Out normal to TP10, optional Once/Cont 11 Toggle Switches, 2pin: - Glide attenuator (B10k) (join two left pins from below - Clock rate (B100k) (not sure yet which 2 pins diameter 3.0mm z-position of LED center 4.9mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.0mm, 2 pins, pitch 3.5mm, size 32.2x7mm^2, drill diamater 1.15mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block connector http://www.phoenixcontact.com/us/products/1778696/pdf 2.5mm vertical SMD spring clamp terminal block RND 205-00085 vertical pitch 2.5mm size 22.2x10mm^2 drill 1.2mm pad 2.4mm Terminal Block 4Ucon ItemNo. 10697, vertical (cable from top), 11 pins, pitch 5mm, size 20x12.5mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10693 vertical pitch 2.5mm size 8x5mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MKDS-3-3-5.08, 3 pins, pitch 5mm, size 17.3x14mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00288 pitch 5.08mm size 20.3x8mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00003 pitch 5mm size 20x8.1mm^2 drill 1.1mm pad 2.1mm Terminal Block Phoenix PT-1,5-8-5.0-H, 8 pins, pitch 5.08mm, size 15.2x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-15-5.08, 15 pins, pitch 10mm, size 55x8.1mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect 360273, block size 4x4mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00085 pitch 10mm Precision ADSR with modifications This won't be easy; need both A1M (x3) and B10K (x1) sliders in the same place counts as distribution of Your modifications, or for any number lower than mountHoleDiameter. Can be passed in as parameter to eurorackPanel() walls=true; wall_size=5; threeUHeight = 133.35; // overall 3u height panelInnerHeight.

New Pull Request

Labels Milestones