Labels Milestones
BackAnd spacers (see build notes) 1 SIP socket, 2.54 mm, 1x4 Light emitting diode Push button switch | | | J12 | 1 | SW_3PDT_x3 | Switch, single pole double throw | | Tayda | A-1138 | | | R21, R22, R23 | 3 * https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K) and https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M * The first two groups should be the same as Littelfuse_Package_H_XN2MM, https://www.infineon.com/dgdl/Infineon-FS75R07N2E4-DS-v02_00-en_de.pdf?fileId=db3a30432f5008fe012f52f916333979 35-lead TH, EasyPIM 2B, same as above if not // height does not arrive in a narrow space between them right_panel_width = width_mm - h_margin; working_height = height - hole_dist_top); cylinder(r=hole_r, h=thickness*2); echo("Putting a hole with radius: ", hole_r , " at ", hole_dist_side, height - v_margin - title_font_size*1.5; top_row = height - v_margin*2 - title_font_size*1.5; saw_out = [output_column, row_1, 0]; fm_pot = [input_column - h_margin/2, bottom_row, 0]; c_tune = [width_mm/2 - h_margin, top_row, 0]; left_rib_x = thickness * 1; //right_rib_x = width_mm - col_right + tolerance*4; //three knobs plus space for everything, lining things up more Make slider and LED footprints match current OpenSCAD model .gitignore | 2 Fireball/Fireball.kicad_prl | 2 .../Unseen Servant/Unseen Servant.kicad_sch | 1 | 2_pin_Molex_connector | KK254 Molex header 2.54 mm spacing 2 pin Molex header 2.54 mm spacing 3 pin Molex header 2.54 mm 2x5"/>