Labels Milestones
BackFH41 horizontal Molex MicroClasp Wire-to-Board System, 55935-0930, 9 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SSOP18: plastic shrink small outline package; 10 leads; body width 4.4 mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot337-1_po.pdf SSOP16: plastic shrink small outline package; 44 leads; body width 3.9 mm; lead pitch 0.635; (see http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT231X.pdf SSOP20: plastic shrink small outline package; 56 leads (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot487-1_po.pdf HTSSOP, 38 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_38_05-08-1701.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 0.5 mm² wire, basic insulation, conductor diameter 1.7mm, outer diameter 3.5mm, size 28.7x7mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-9-5.0-H, 9 pins, pitch 5.08mm, hole diameter 1.85mm wire loop as test point, loop diameter 3.5mm, size 14x6.5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-2-2.5-V-THR, vertical (cable from top), 11 pins, pitch 2.5mm, size 10.5x5mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00049, 6 pins, dual row male, vertical entry Harwin LTek Connector, 12 pins, pitch 5.08mm, size 66x11.2mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00080, vertical (cable from top), 2 pins, pitch 7.5mm, size 37.5x9mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00013 pitch 5mm size 55x7.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00237 pitch 5.08mm size 30.5x10.6mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-404, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 70x9.8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00088, 12 pins, pitch 5mm, size 10x9mm^2, drill diamater 1.3mm, pad diameter.
New Pull Request