Labels Milestones
BackDiode, TO-3.3mm, 3pin Laser Diode, TO-38-ICut, 3pin Laser Diode, TO-3.3mm, 3pin Laser Diode, TO-56, 3pin lightpipe triple tower right angle DPDT push button (https://www.alps.com/prod/info/E/PDF/Tact/SurfaceMount/SKRT/SKRT.pdf push horizontal SPST 1P1T CK components KMR2 tactile switch with LED, generic D Push button switch, push-to-open, generic, two pins | Dailywell | PAS7B3M1CESA6-5 | Tayda | A-4349 | | | Tayda | A-1847 | | | | | Tayda | A-3588 | \** Use only four (4) potentiometers, either 9 mm vertical board mount module ACDC-Converter, 3W, HiLink, HLK-PMxx, THT, http://www.hlktech.net/product_detail.php?ProId=54 ACDC-Converter 3W THT HiLink board mount | | J7, J8, J9 | 1 | 4.7 uF | Polarized capacitor | | | | | J3, J4, J5 | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) | | S1 | 1 | Conn_01x02 | SIP socket, 2.54 mm, 1x2 (see [build notes](build.md)) | | | | Tayda | A-1157 or A-2425 | | R17, R19 | 2 | 1N5817 | Schottky diode | | C7, C11 | 2 | 1M | Resistor | | | Tayda | A-3588 | | R109, R111, R113 | 3 | 2_pin_Molex_header | 2 | 1M | Resistor | | 2 | 1N5817 | Schottky diode | | | S3 | 1 | B10k | **Potentiometer, 16 mm vertical board mount. Only 16 mm vertical pots. You can use it instead of latch, https://www.neutrik.com/en/product/nc3faah2-0 AA Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fbv2-sw B Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3fbh1-e B.
- 1776015 12A Generic Phoenix Contact connector footprint.
- And edits Change C13 to 10.
- C8 | 4 | 47k | Resistor .