Labels Milestones
BackSOD70 2-pin TO-92 horizontal, leads molded, narrow, drill 0.75mm, handsoldering variant with enlarged pads (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf TO-92L Molded Narrow transistor TO-92L leads in-line (large body variant of MSOP-16 (see http://cds.linear.com/docs/en/datasheet/3630fd.pdf 12-Lead Plastic DFN (7mm x 4mm) (see Linear Technology DFN_8_05-08-1719.pdf DFN, 8 Pin (https://www.ti.com/lit/ds/symlink/ina333.pdf#page=30), generated with kicad-footprint-generator ipc_noLead_generator.py mlf 8 2x2 mm 16-Lead Quad Flat, No Lead Package - 3x3 mm Body [QFN] with corner pads; see figure 8.2 of https://www.silabs.com/documents/public/data-sheets/efm8bb1-datasheet.pdf 20-Lead Plastic Quad Flat Pack, 3x3mm Body, 0.65mm Pitch, S-PVSON-N8, http://www.ti.com/lit/ds/symlink/opa2333.pdf 3x3mm Body, 0.5mm Pitch (http://www.allegromicro.com/~/media/Files/Datasheets/ACS711-Datasheet.ashx Allegro Microsystems SIP-4, 1.27mm Pitch (http://www.allegromicro.com/~/media/Files/Datasheets/A1369-Datasheet.ashx Allegro Microsystems SIP-3, 1.27mm Pitch (https://www.diodes.com/assets/Package-Files/SIP-3-Bulk-Pack.pdf Diodes SIP-3 Bulk Pack, 1.27mm Pitch (http://www.allegromicro.com/~/media/Files/Datasheets/A1369-Datasheet.ashx Allegro Microsystems 24-Lead Plastic QFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic Shrink Small Outline (ST)-4.4 mm Body with Exposed Pad (see https://www.diodes.com/assets/Package-Files/SO-8EP.pdf 20-Lead Plastic Thin Quad Flatpack (PF) - 14x14x1 mm Body, 2.00 mm [TQFP] (see Microchip Packaging Specification 00000049BS.pdf TQFP, 100 Pin.
New Pull Request