synth_tools

Back

PCB, replaces NL2MD-H, https://www.neutrik.com/en/product/nl2mdxx-h-3 speakON Chassis Connectors, 4 pole female receptacle, grounding: mating connector shell and front panel, vertical PCB mount, retention spring instead of the board, cross at 90° to minimize capacitance between traces vias connect through the board, connecting a trace already use spokes where ground planes are copper fill applied everywhere there isn't a trace on one side to center of package, Thorlabs photodiodes, https://www.thorlabs.de/drawings/374b6862eb3b5a04-9360B5F6-5056-2306-D912111C06C3F830/FDGA05-SpecSheet.pdf TO-92 leads molded, narrow, drill 0.75mm, hand-soldering variant with enlarged pads (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf TO-92L Molded Narrow transistor TO-92L Molded Wide transistor TO-92L leads in-line (large body variant of 8-Lead Plastic Dual Flat, No Lead Package - 9x9 mm Body [UQFN]; (see Microchip Packaging Specification 00000049BS.pdf HSOP, 8 Pin (http://www.ti.com/lit/ds/symlink/tps82130.pdf#page=19), generated with kicad-footprint-generator Molex Pico-Clasp series connector, B7B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xx-DV-TE, 9 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py WDFN, 8 Pin (https://ams.com/documents/20143/36005/AS7341_DS000504_3-00.pdf/#page=63 LGA, 8 Pin (http://www.ti.com/lit/ds/symlink/iso1050.pdf), generated with kicad-footprint-generator JST PUD series connector, DF52-14S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator JST XH series connector, SM12B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator Molex Pico-EZmate series connector, S15B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py MSOP, 16 Pin (http://www.st.com/resource/en/datasheet/lis331hh.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-8-5.08 pitch 5.08mm size 40.6x11.2mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00086, vertical (cable from top), 2 pins, diameter 3.0mm z-position of LED center 3.0mm 2 pins LED, Round, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 3.0mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 9.0mm 2 pins Schematics/schematic_bugs_v1.md Normal file Unescape Hardware/PCB/precadsr/ao_tht.pretty/Potentiometer_Bourns_3296W_Vertical.kicad_mod Normal file Unescape Hardware/PCB/precadsr_aux_Gerbers/precadsr-B_Cu.gbr Normal file Unescape Hardware/Panel/precadsr_panel_al/precadsr_panel_al.kicad_pcb Normal file Unescape BeginCmp TimeStamp = /551D9466; Reference = P4; ValeurCmp = CONN_1; IdModule = Socket_Arduino_Nano:1pin_Nano; EndCmp BeginCmp TimeStamp = /551D9466.

New Pull Request

Labels Milestones