Labels Milestones
Back= 133.35; //overall 3u height offsetToMountHoleCenterX=hp;//1hp margin on each side echo(offsetToMountHoleCenterY); echo(offsetToMountHoleCenterX); module eurorackPanel(panelHp, mountHoles=2, hw = holeWidth, ignoreMountHoles=false cube([hp*panelHp,panelOuterHeight,panelThickness]); if (deepJackHoles) { } module rail(height) { difference() { difference() { union() { shape(fsh, cird+cdp*smt/100, cord, cfn*4, chg); module shape(hsh, ird, ord, fn4, hg x0= 0; x1 = hsh > 0 ? Ord : ird; y0=-0.1; y1=0; y2=abs(hsh); y3=hg-abs(hsh); y4=hg; y5=hg+0.1; if ( hsh >= 0 module knurled_finish(ord, ird, lf, sh, fn, rn) { for(j=[0:rn-1]) assign(h0=sh*j, h1=sh*(j+1/2), h2=sh*(j+1)) { for(i=[0:fn-1]) assign(lf0=lf*i, lf1=lf*(i+1/2), lf2=lf*(i+1)) { polyhedron( points=[ [ 0,0,h0], [ ord*cos(lf0), ord*sin(lf0), h0], [ ird*cos(lf0), ird*sin(lf0), h1], [ ord*cos(lf1), ord*sin(lf1), h1], [ ord*cos(lf1), ord*sin(lf1), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ ord*cos(lf1), ord*sin(lf1), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ 0,0,h2], [ ord*cos(lf0), ord*sin(lf0), h0], [ ird*cos(lf0), ird*sin(lf0), h1], [ ord*cos(lf1), ord*sin(lf1), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ 0,0,h2], [ ord*cos(lf0), ord*sin(lf0), h0], [ ird*cos(lf0), ird*sin(lf0), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ ord*cos(lf1), ord*sin(lf1), h1], [ 0,0,h2], Created on Tue Mar 5 20:19:51 2024 Copper Layer Stackup: ============================================================= L1 : F.Cu front L2 : B.Cu back Drill file 'precadsr-panel.drl' contains plated through holes: ============================================================= T1 3.200mm 0.1260" (4 holes) T5 15.200mm 0.5984" (1 hole Total plated holes Total unplated holes count 16 ============================================================= Total unplated holes count 0 Hardware/Panel/precadsr-panel-Gerbers/precadsr-panel-CmtUser.gbr Normal file View File 3D Printing/Pot_Knobs/potknob_parametric.scad Executable file View File # For PCBs designed using KiCad: http://www.kicad-pcb.org/ # Format documentation: https://kicad.org/help/file-formats/ # Temporary files *.000 *.bak *.bck *.kicad_pcb-bak *.kicad_sch-bak *-backups */fp-info-cache *.kicad_prl *.sch-bak *~ _autosave-* *.tmp *-save.pro *-save.kicad_pcb fp-info-cache # Netlist files (exported from Eeschema # Autorouter files (exported from Pcbnew # Exported BOM files All-in-one module with a hair of margin // margins from edges h_margin = hole_dist_side + thickness; right_rib_x = width_mm - thickness*2.2; left_rib_x = thickness * 1; h_wall(h=4, l=right_rib_x); } module knurled_finish(ord, ird, lf, sh, fn, rn) { for(j=[0:rn-1]) assign(h0=sh*j, h1=sh*(j+1/2), h2=sh*(j+1)) { for(i=[0:fn-1]) assign(lf0=lf*i, lf1=lf*(i+1/2), lf2=lf*(i+1)) { polyhedron( points.
New Pull Request