synth_tools

Back

Connector, M20-89003xx, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 48 Pin (https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2100_datasheet_Rev1.08.pdf (page 45)), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 2 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3.5mm, hole diameter 1.5mm THT pad as test Point, diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type175_RT02704HBLC, 4 pins, pitch 5.08mm, size 55.9x9.8mm^2, drill diamater 1.5mm, 2 pads, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00086, vertical (cable from top), 2 pins, pitch 5mm, size 17.3x14mm^2, drill diamater 1.4mm, pad diameter 3mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xx-DV-PE-LC, 13 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole M2, height 2, Wuerth electronics 9774090360 (https://katalog.we-online.de/em/datasheet/9774090360.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 6 times 1.5 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_noLead_generator.py Analog LFCSP, 16 pin, 4x4mm, 2.1mm sq pad (http://www.analog.com/media/en/technical-documentation/data-sheets/ADG633.pdf LFCSP, 16 Pin (https://ams.com/documents/20143/36005/AS5055A_DS000304_2-00.pdf#page=24), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 2.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00084 pitch 10mm size 65x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00238 pitch 5.08mm 1W length 9.9mm diameter 3.6mm Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=60mm, , length*diameter=55*23.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf CP Axial series Axial Horizontal pin pitch 27.50mm length 29mm width 13mm Capacitor C, Rect series, Radial, pin pitch=37.50mm, , length*width=41.5*35mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 7.50mm diameter.

New Pull Request

Labels Milestones