synth_tools

Back

Through PCB, vertical BNC RF Interface, PCB mount 4 pin, 2.0mm square SMD pads Net tie, 4 pin, 0.3mm round THT pads Net tie, 2 pin, 1.0mm round THT pads Laser Gaming Sensor ADNS-9800 Fiberoptic Transmitter TX, HFBR series (https://docs.broadcom.com/docs/AV02-3283EN TSL2550 ambient light sensor, i2c interface, 6-pin chipled package, https://docs.broadcom.com/docs/AV02-2315EN ambient light sensor chipled Broadcom DFN, 6 Pin (http://www.ti.com/lit/ds/symlink/tps61040.pdf#page=35), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 2.5 mm² wire, basic insulation, conductor diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-501, 45Degree (cable under 45degree), 2 pins, pitch 3.5mm, size 25.5x8.3mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00291, 6 pins, pitch 5mm, size 60x8.1mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-324 45Degree pitch 5mm size 76.5x15mm^2 drill 1.2mm pad 3mm Terminal Block 4Ucon ItemNo. 20193, 3 pins, diameter 5.0mm z-position of LED center 1.6mm, 2 pins, diameter 3.0mm z-position of LED center 3.0mm, 2 pins LED, diameter 3.0mm z-position of LED center 6.0mm 2 pins diameter 5.0mm z-position of LED center 1.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, pitch 5.08mm, size 30.5x9.8mm^2, drill diamater 1.4mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block TE 282834-4, 4 pins, WP154A4, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-154A4SUREQBFZGEW(Ver.11A).pdf LED diameter 20.0mm 2 pins LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 2.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins LED_Oval, Oval, Oval size 5.2x3.8mm^2, 2 pins, diameter 3.0mm 2 pins LED diameter 3.0mm z-position of LED center 2.0mm, 2 pins, pitch 10mm, size 75x10.3mm^2, drill diamater 1.2mm, pad diameter 2mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Net tie, 4 pin, 2.0mm square SMD rectangular pad as test point, loop diameter 3.8mm, hole diameter 0.7mm THT pad as test Point, diameter 1.5mm (loose fit), length 10.0mm solder Pin_ with flat with hole.

New Pull Request

Labels Milestones