Labels Milestones
Back"no_connect_dangling": "warning", "pin_not_connected": "error", "pin_not_driven": "error", "pin_to_pin": "warning", "power_pin_not_driven": "error", "similar_labels": "warning", More tweaks after pro review "design_settings": { "defaults": { PCB initial layout, no traces "copper_text_size_h": 1.5, "copper_text_size_v": 1.5, "copper_text_thickness": 0.3, PCB initial layout, no traces "silk_text_size_h": 1.0, "silk_text_size_v": 1.0, PCB initial layout, no traces }, Add ground fills, fix some clearance issues, make all power traces large Added input resistor for sync; placed everything on PCB with on-board components Added hard sync input. - But could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. *** Expensive, about $3 each. * Replacing LEDs in many places might be fine, might introduce intermittents - Don't put R8 so close to R26 -- D36/R47 too close Testing before powering up: Clock In Normal - 1k to U2-8 (AND NOT.
- File Panels/FireballSpellVertSmaller.png Normal file View File.
- 1614 main MK_SEQ/Schematics/Unseen Servant/Unseen Servant.kicad_pcb.