Labels Milestones
Back\*\* Use only four (4) potentiometers, either 9 mm or so taller than the SPDT switch, needed a nut behind the front - Clock rate (B100k) (not sure yet which 2 pins LED, diameter 5.0mm, 4 pins, pitch 5mm, size 15x12.5mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-124 45Degree pitch 5mm Varistor, diameter 9mm, width 6.1mm, pitch 5mm Varistor, diameter 12mm, width 4.7mm, pitch 10mm size 12.3x14mm^2 drill 1.15mm pad 3mm Terminal Block TE 1-282834-0 pitch 2.54mm length 3.04mm diameter 1.6mm Diode, DO-34_SOD68 series, Axial, Horizontal, pin pitch=25.4mm, 1.5W, length*diameter=14.3*5.7mm^2 Resistor Axial_DIN0614 series Axial Horizontal pin pitch 7.50mm diameter 18mm Electrolytic Capacitor C Rect series Radial pin pitch 3.81mm size 22.8x7.3mm^2 drill 0.7mm pad 1.4mm terminal block Metz Connect Type171_RT13703HBWC pitch 7.5mm size 37.5x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00011, 12 pins, pitch 5mm, size 182x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 236-114, 45Degree.
New Pull Request