synth_tools

Back

C&K PVA1 https://www.ckswitches.com/media/1343/pva.pdf momentary / push-push button, h=15mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf momentary / push-push button, h=13mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf momentary / push-push button, h=20.5mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf tact sw push 6mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm tact sw push 6mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=13mm FS5700 series pushbutton footswitch, DPDT, https://www.e-switch.com/system/asset/product_line/data_sheet/226/FS5700.pdf Switch with High Contact Reliability, Top-actuated Model, without Ground Terminal, with Boss SPST button switch OFF-(ON) | Dailywell | PAS7B3M1CESA6-5 | Tayda | A-1624 or A-2969 | | C1, C11 | 2 | 1N5817 | Schottky diode | | J7 | 1 | B10k | Potentiometer | | | Tayda | A-2939 | | Tayda | A-1847 | | | | | | C6, C7, C8, C9 | 1 | LED | Light emitting diode | | | | | | | ----- | --- | ---- | | | L1 | 1 | 2_pin_Molex_header | 2 main MK_VCO/Panels/Font files/Futura XBlk BT.ttf create mode 100644 Schematics/SynthMages.pretty/C_Rect_L22.0mm_W6.1mm_P20mm_MKT_BIG_RED_CAP.kicad_mod create mode 100644 3D Printing/Pot_Knobs/scaled_french_pot.mix cube([board_width, board_height, thickness]); cylinder(thickness+standoff_height, r=standoff_radius, $fn=360); cylinder(h=thickness+standoff_height, r=standoff_radius, $fn=360); cylinder(h=thickness+standoff_height, r=standoff_radius, $fn=360); cylinder(h=thickness+standoff_height, r=standoff_radius, $fn=360); cube([cutout_width, cutout_height, thickness+3]); cylinder(h=thickness+standoff_height+3, r=hole_radius, $fn=360); vertex 0 7.34398 6.86102 vertex 7.34599 0.0206242 6.86125 facet normal 0.03414 0.0621913 0.99748 vertex -3.4113 7.24174 19.9481 facet normal -0.0950763 -0.0293641 0.995037 facet normal -3.278595e-01 9.447264e-01 -3.453235e-04 vertex -9.976002e+01 1.056904e+02.

New Pull Request

Labels Milestones