3
1
Back

External antenna, https://www.espressif.com/sites/default/files/documentation/esp32-s3-mini-1_mini-1u_datasheet_en.pdf 2.4 GHz Wi-Fi and Bluetooth module https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf 2.4 GHz Wi-Fi and Bluetooth combo chip, external antenna, https://www.espressif.com/sites/default/files/documentation/esp32-s3-mini-1_mini-1u_datasheet_en.pdf 2.4 GHz Wi-Fi and Bluetooth module Single 2.4 GHz Wi-Fi and Bluetooth combo chip https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32_datasheet_en.pdf Single 2.4 GHz Bluetooth ble zigbee 802.15.4 flash crypto ATSAMR21G18 AT45DB041E TECC508A U.Fi Class 4 Bluetooth Module with on-board components Added hard sync to schematic, laid out PCB with on-board antenna Class 2 Bluetooth Module with on-board components Added hard sync input. - Portamento (aka slew rate controller aka glide). - Knob version fairly simple. - CV out - CLK out - CLK out - RESET / CASCADE out - RESET / CASCADE out - Gate out (could normal to Reset In socket - Reset Sw - when pressed, short +12V and Reset In - diode to U2-3 - Clock out socket, with option to send to 16-pin cable when nothing is plugged into CLOCK. Could replace step IDs with a diode matrix to select segments from each step. UI: One potentiometer for internal clock rate. Switches: Update current state.

New Pull Request