synth_tools

Back

Size 22.5x11mm^2 drill 1.4mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-5 pitch 5mm size 20x9.8mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00007, 8 pins, pitch 10mm, size 62.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix MKDS-1,5-15, 15 pins, pitch 5mm, size 30x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00303 pitch 10mm size 92.3x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 10699, vertical (cable from top), 2 pins, diameter 5.0mm z-position of LED center 2.0mm 2 pins LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 2.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins Schematics/schematic_bugs_v1.md Normal file Unescape Schematics/Unseen Servant/Unseen Servant Front Panel v1.kicad_pcb Normal file View File Images/loop.png Normal file View File Images/precadsr-panel-holes.png Normal file Unescape Schematics/OttosIrresistableDance/OttosIrresistableDance.kicad_sch Normal file View File Hardware/Panel/precadsr_panel_al_Gerbers/precadsr_panel_al-NPTH.drl Normal file Unescape Hardware/PCB/precadsr/ao_tht.pretty/Potentiometer_Bourns_3296W_Vertical_screw_centered.kicad_mod Normal file Unescape Hardware/PCB/precadsr/ao_symbols.lib Normal file Unescape Hardware/Panel/precadsr-panel-Gerbers/precadsr-panel-CuTop.gtl Normal file View File # ENV Envelope generator main VCA/Schematics/Dual_VCA_with_cv2_OTA.diy 7462 lines PSU/Synth Mages Power Word Stun.kicad_sch (text "←—— Can this connect this way, or does it need a bigger flat flat_size = 5 square(top_rounding_radius + pad, top_rounding_radius + pad); circle(r = top_rounding_radius, $fn = knob_faces); // Create a hole with radius: ", hole_r , " at ", width_mm - h_margin; working_height = height - v_margin - title_font_size*1.5; saw_out = [third_col, third_row, 0]; saw_out = [output_column, row_2, 0]; pwm_in = [input_column + h_margin/2, bottom_row, 0]; pwm_duty = [input_column, bottom_row, 0]; fm_in = [input_column - h_margin/2, bottom_row, 0]; cv_in = [h_margin, row_1, 0]; fm_pot = [input_column + h_margin/2, row_1, 0]; fm_in = [h_margin+working_width/8, row_4, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_4, 0]; pwm_cv_lvl = [second_col, fifth_row, 0]; //left_rib_x = thickness .

New Pull Request

Labels Milestones