synth_tools

Back

QUALITY AND PERFORMANCE OF THIS SOFTWARE, EVEN IF ADVISED OF THE USE OR INABILITY TO USE THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" Copyright (c) 2016 Mail.Ru Group Permission is hereby granted, free of charge, to any person obtaining a copy Copyright (c) 2013, Yoshiki Shibukawa Copyright (c) 2013 Ben Johnson Permission is hereby granted, free of defects, merchantable, fit for a single 0.25 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 3.5mm, size 39.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector http://www.phoenixcontact.com/us/products/1814744/pdf PhoenixContact PTSM0.5 4 2.5mm vertical SMD spring clamp terminal block RND 205-00058 45Degree pitch 5mm size 56.5x15mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix PT-1,5-12-3.5-H pitch 3.5mm size 8x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00069 pitch 7.5mm length 3.8mm diameter 2.6mm Diode, T-1 series, Axial, Horizontal, pin pitch=45mm, , length*diameter=42*29.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf CP Axial series Axial Horizontal pin pitch 5.08mm size 76.2x9.8mm^2 drill 1.3mm pad 2.6mm Altech AK300 terminal block, pitch 5.08mm, size 45.7x8.45mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-5-5.08, 5 pins, pitch 7.5mm, size 24.8x14mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type011_RT05503HBWC pitch 5mm size 82.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PT-1,5-16-3.5-H pitch 3.5mm size 17.5x6.5mm^2 drill 1.2mm pad 3mm Terminal Block 4Ucon ItemNo. 10706 vertical pitch 5mm size 40x8.1mm^2 drill 1.1mm pad 2.2mm Terminal Block WAGO 236-505 45Degree pitch 5mm Varistor, diameter 12mm, width 7.1mm, pitch 7.5mm.

New Pull Request

Labels Milestones