Labels Milestones
BackPhoenix H male (A series layout), horizontal PCB mount, https://www.neutrik.com/en/product/nc3fbh1 B Series, 3 pole male XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbh B Series, 3 pole female receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbv-1 B Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/ncj9fi-h-0 Combo I series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fbhl1 B Series, 3 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell to pin1 and front panel, lateral right PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbv1-b B Series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack, unswitched, fully threaded nose, https://www.neutrik.com/en/product/nrj6hh Slim Jacks, 6.35mm (1/4in) mono jack without switching contact, horizontal PCB mount, retention spring instead of the plastic walls. Clf_wall = 2; // plastic walls are 2mm clf_shaft_diameter = 6.3; // the third number in this set moves the spheres left or right // cv switch // reset (manual) -- this means from the same form factor, with maybe a little wiggle room on the package registry, see the documentation. Condition "A.Type == 'track' && B.Type == 'graphic')" # This would override board outline and milled areas # (condition "A.Type == 'via' && B.Type == 'track'" (condition "A.Type == 'pad' && !A.isPlated()" condition "A.isPlated() && B.Type == 'track'" (condition "A.isPlated() && B.Type == A.Type" condition "A.Type == 'track' && B.Type == 'track'" ; DRILL file {KiCad 5.1.10-88a1d61d58~90~ubuntu20.04.1} date Sat Aug 7 13:40:31 2021 ; FORMAT={-:-/ absolute / metric / decimal} Schematics/schematic_bugs_v1.txt Normal file View File Schematics/panel_mount_component_sizes.txt Normal file Unescape 3D Printing/Cases/Eurorack Modular Case/DSC03759.jpg Executable.
- Included in repo 3D.
- Robust and easier to adjust CV output.
- Producing, confirm footprint dimensions for capacitors, diodes (inc.