synth_tools

Back

TO-247-2 Vertical RM 4.58mm IPAK TO-251-2, Vertical, RM 10.9mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf TO-264-2 Vertical RM 2.54mm TO-220F-3, Vertical, RM 1.27mm, staggered type-1, see http://www.st.com/resource/en/datasheet/l298.pdf TO-220-15 Vertical RM 1.27mm Multiwatt-7 staggered type-2 TO-220-11, Horizontal, RM 2.54mm, see http://ww1.microchip.com/downloads/en/DeviceDoc/20005685A.pdf TO-247-5 Horizontal RM 2.286mm SIPAK, Vertical, RM 5.475mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf TO-218-3 Horizontal RM 5.45mm TO-247-4, Horizontal, RM 2.54mm, see http://www.st.com/resource/en/datasheet/stp20nm60.pdf TO-220F-3 Vertical RM 2.54mm TO-220F-4, Vertical, RM 2.29mm, IPAK, see https://www.diodes.com/assets/Package-Files/TO251.pdf TO-251-2 Vertical RM 10.9mm TO-264-2, Vertical, RM 1.7mm, Pentawatt, Multiwatt-5, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421_straight_lead.pdf TO-220-5 Vertical RM 2.29mm IPAK TO-251-3, Horizontal, RM 5.45mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf TO-264-2 Vertical RM 10.9mm TO-264-2, Vertical, RM 3.81mm, see https://www.onsemi.com/pub/Collateral/NJL3281D-D.PDF TO-264-5 Vertical RM 0.97mm Multiwatt-9 staggered type-1 TO-220F-9 Vertical RM 1.27mm staggered type-2 TO-220-4 Horizontal RM 5.45mm TO-46-2, Pin2 at center of package, Thorlabs photodiodes TO-46-3, Pin2 at center of hole, with a nut behind the front Don't put R8 so close to R26 -- D36/R47 too close - Clock rate goes down when resistance goes up, opposite to expectation. Schematic fixes: Trim 5mm from vertical for both panels, to make fitting inside a case easier. Or 10mm if.

New Pull Request

Labels Milestones