Labels Milestones
BackWIP; take these as suggestions until we get a bit organize a bit LUTHERS_VCO.diy => Schematics/LUTHERS_VCO.diy | 0 Schematics/MK_Schematic.png | Bin 38860 -> 0 bytes Images/precadsr-panel.png | Bin 0 -> 36336 bytes create mode 100644 3D Printing/Panels/Radio Shaek Standoff.scad insert_depth = 12; hole_vdist = 44.5; hole_radius = hole_diameter / 2; standoff_radius = hole_radius * 2.5; standoff_height = 3; // Length of the stem. [mm] // -------------------------------------- // Whether to create an engraved indicator arrow on the top (mm h_margin = hole_dist_side*4; v_margin = hole_dist_top*5; width_mm = 70.8; // 14HP×5.08mm = 71.12; ES for 14HP is 70.8 c_tune = [second_col, fifth_row, 0]; //left_rib_x = thickness + 6 + tolerance; rotate_vector_cos = 0.94; // 'x' of 20 degree rotation rotate_vector_sin = 0.34; // 'y' of rotation left_edge = -rotate_vector_sin * rail_depth; right_edge = height - hole_dist_top); cylinder(r=hole_r, h=thickness*2); echo("Putting a hole with radius: ", hole_r , " at ", hole_dist_side, hole_dist_top); echo("Putting a hole with radius: ", hole_r , " at ", width_mm - h_margin; cv_in = [h_margin, row_1, 0]; triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; fm_pot = [input_column - h_margin/2, bottom_row, 0]; cv_in = [input_column, bottom_row, 0]; c_tune = [width_mm/2 + h_margin, top_row, 0]; scale([.38,.38,-.005]) surface("FireballSpellVertSmaller.png", center=true, invert=false); Am totally not using git correctly ec09111f77 Futura BT font files Schematics/Unseen Servant/Unseen Servant.kicad_sch | 785 **UI:** edits README.md file 666c48f795 adds README.md file again edits README.md | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS.
- -0.596366 7.73103 facet normal 5.393419e-002.
- S28B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator JST.
- 26-60-5030, 3 Pins per row.